Etesia NECTS User Manual Download Page 16

16

Most operating problems are due to wrong handling and using, poor use of the lawnmower or the lack of normal recommended maintenance.
The following table describes simple methods of determining a few malfunctions and correcting them. 

If the problem persists, we recommend that you contact one of our approved ETESIA dealers (list on requist to ETESIA - 67165 

WISSEMBOURG Cedex - France).

Before doing anything, disconnect the power cable.

ANORMAL OPERATION 

PROBABLE CAUSE 

REMEDY

Uneven running, strong vibrations. 

Blade balance .................................................................Rebalance or replace the blade. 

  

Cutting blade loose ........................................................Tighten the attaching screw.  

  

Coupling washer defective .............................................Have replaced.

Poor cutting. 

Blade mounted upside down. .........................................Refit with blade surfaces facing the engine. 

  

Blunt blade .....................................................................Sharpen or change. 

  

Blade not turning in a horizontal plane.. ........................Straighten or change. 

  

Wrong choice of cutting height ......................................Match the cutting height to the working conditions.

The lawnmower is difficult to 

Wrong adjusted or stretched clutch cable ......................Contact an approved ETESIA service engineer. 

engage in gear or disengage. 

The grass box fills badly.  

Defective blade or mounted upside down. .....................Replace or refit correctly.   

 

 

   

Cutting too low ..............................................................Change the cutting height. 

   

Blocked grass box grille .................................................Clean with a brush. 

   

Opening and housing blocked by cuttings and earth .....First disconnect the electric cable and then   

    

                                                                                        clean the housing.

Grass remains.  

Height adjustment too low .............................................Adjust the deck cutting height lever. 

   

Opening and housing blocked by cuttings and earth .....First disconnect the electric cable and then   

                                                                                                                                                      clean the housing.

Important: Only use ETESIA parts as replacements. The quality of the work, the life of the lawnmower and your safety 

depend on it.

In addition to risks incurred by the user, the use of parts other than the manufacturer’s will result in the cancellation of the warranty for any 
damage caused. ETESIA refuse to accept responsibility for accidents due to the use of parts not coming from the manufacturer.

10• STANDARD REPAIRS - PROBLEMS AND REMEDIES

Disconnect the power cable before carrying out any work under the cutting deck. 

ITEM

BEFORE EVERY CUT   EVERY 50 HOURS

PERIODICALLY

COMMENTS

Coupling washer

Check condition

Replace after strong 

shock

Drive clutch

Clean and check the 

cable adjustment

Maintain perfectly clean 

Blade

Check condition 

Replace after strong shock

Cables 

Check condition

Screws

Check tightness

The best maintenance is regular cleaning after each mowing (cutting deck, wheels, engine, cutting heights, transmission system,…).

11• REGULAR MAINTENANCE SUMMARY TABLE

Summary of Contents for NECTS





















Reviews: