background image

22

12• WARRANTY

DEFINITIONS

-  Dealer, importer = distributor linked to ETESIA by an agreement 

(dealership or importer contract). The dealer and the importer are in 

charge of selling and servicing ETESIA machines.

- User, buyer = physical or moral person, company, collectivity or 

association having bought legally a machine new or second hand 

from a dealer.

-  Domestic use = use of a machine on a private ground. Machine is 

owned by the user and just use to clear its private piece of ground 

(main or secondary residence).

-  Professional use = use of an ETESIA machine, in exchange of 

money or not, on public areas to maintain companies or institutions 

like : hospitals, associations,….or on private fields being owned by 

a third person.

-  Wear parts/consumable parts : parts needing to be changed inevi-

tably to enable an optimal normal use of the machine.

-  Normal use = use of the machine according to all instructions 

mentioned in the instruction book (including safety and mainte-

nance).

GENERAL WARRANTY CONDITIONS

-  In addition to the legal warranty, ETESIA offers a contractual war-

ranty. The ETESIA warranty concerns the exchange of parts free 

of charge in case of material, production or conception fault. This 

warranty applies to the product as he leave ETESIA production line. 

-  The delivery company is only responsible in case of transport 

damage. It is however the addresse responsibility when damages 

occurs during transport to mention reserves on the delivery note 

when receiving the goods and to inform ETESIA within 48H by 

registered letter.

-  The instruction book delivered with every machine contents all 

information regarding machines use. Any different use from the one 

described in the instruction book can be dangerous for the user and 

reduce machine life. In such cases, ETESIA can not be held res-

ponsible.

CONTRACTUAL WARRANTY

-  ETESIA offers, in addition to the statutory warranty, in particu-

lar that covering hidden and latent defects and the guarantee of 

conformity of the product with the contract due by the vendor to the 

consumer, a contractual warranty:

The ETESIA contractual warranty is allowed for 2 years in professio-

nal use and for 3 years on domestic use (warranty period starting the 

first day when the machine is purchased by the user). This warranty 

is valid if :
1) Instructions from the instructions book have been respected.
2) The warranty card has been returned to ETESIA immediately after 

the machine purchase or completed on the extranet site.

3) Strict respect of or revisions as defined in the maintenance table of 

the user instructions is required. 

4) To request a repair under warranty, the buyer must contact the 

ETESIA dealer. Should it not be possible, he could contact 

ETESIA who will propose an alternative solution.

5) Any suspected failure by way of a defect within the framework of 

the contractual warranty must be presented by an approved dealer.   

Only repairs done by ETESIA dealers workshops can be taken 

under warranty.

6) Any material, production or conception fault recognized by 

ETESIA as such will be eligible for warranty (parts and labour). It 

will therefore be paid back to the dealer according to charge scale 

mentioned in the agreement.

It is the dealers responsibility to make sure that the end user 

does receive the complete warranty allowed by ETESIA. Should 

ETESIA not recognize any fault, the dealer will be held res-

ponsible. ETESIA reserves the right to cancel the decision with no 

compensation or warning.

7) Any intervention done within warranty time, in particular in case 

of parts exchanged, will not give right to any new warranty period.

8) In case of parts exchanged under warranty, ETESIA reserves the 

right to use either new or second hand parts. Parts replaced can be 

requested to be returned at any time by ETESIA. Should ETESIA 

not receive these part(s), a warranty claim would automatically be 

rejected. 

9)  This warranty however does not cover : parts damaged during a 

repair action ; machines not having been serviced according to 

the repair schedule mentioned in the instruction book ; parts with 

normal wear.
Please  find  a  list  (not  complete)  of  wearing  parts:  spark  plugs, 

filters,  exhaust,  seals,  membranes,  blades,  blade  coupling  parts, 

belts, clutchs, batteries, battery electrolytes, control cables, sheath, 

fuel pipes, durits, cooling liquid, hydraulic and lubrication liquids, 

fuel, seat, bonnets, grassbox, material grassbox frame, mudguards, 

pedal covers, running board cover, anti scalp kit, roll axle...

10) Warranty right is cancelled in the following cases:

a) Damages due to non respect of safety, maintenance use and 

storage instructions. ETESIA will not be held responsible, 

legally in particular, for damages resulting from other uses 

than the ones described in the instruction book. 

b) Damages due to accident or collision.

c) Damages due to a modification of the original machine or use 

of non original spare parts. 

d) Damages to machines not having been maintained by the 

ETESIA dealer network.

11) In case of owner change, the outstanding warranty period can be 

transferred to the new owner. However to enable this transfer a 

written request need to be sent to the ETESIA after sales depart-

ment. This request needs to attest as well that the new end user 

has received the instruction book for the machine as well as the 

warranty terms.

12) ETESIA reserves the right to check that preliminary conditions 

for warranty have been respected by the buyer. 

13) When a warranty application is requested, ETESIA will deliver 

the parts as soon as possible. However an immediate delivery can 

not be requested. 
A delay in delivery would in no case give right to compensation 

or to warranty extension.

14) Any additional claims to ETESIA is excluded.
15) In the event of a dispute over a warranty claim, the only compe-

tent court will be the one indicated on the distribution contract 

between ETESIA and the approved dealer in question. 

IMPORTANT NOTE : 

As soon as a machine purchase takes place, the warranty cards needs 

to be :
- completed, signed and sent back to   

 

ETESIA – WARRANTY SERVICE

67165 WISSEMBOURG CEDEX FRANCE

- or completed by your dealer on line on the extranet.
These contractual guarantees are in addition to the legal warranty 

against hidden and latent defects and the guarantee of conformity of 

the contract by the seller to the consumer. 

Summary of Contents for AH75



























Reviews: