-2-
-
Use Cinch-connectors ‚Tube out‘, set rear switch ‚RCA
conn.’ to position 0 dBu or to - 6 dBu to avoid overload
of connected equipment
-
VU-meters indicate the volume gain of the recording
To balanced high level inputs
-
As the XLR-sockets positioned below are in parallel
with the incoming signal those can supply the
EternalArts headphone amplifier ‘twin type profes-
sional’ for monitoring or feed a second recorder for
duplication
Important Note:
Because of the technical layout of the circuitry the XLR-
connectors of the Universal Tape Stage may not be used in
short-circuit to achieve an unbalanced signal.