Cleaning and maintenance
Pull the power plug prior to cleaning the device. Do not use any caustic cleaning agents and
make sure that no water penetrates the device.
To protect yourself from electric shock, never immerse the device, its cables and the plug in
water or other liquids.
Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
Do not use any petrol products to not damage the plastic parts and the casing/operating
panel.
Do not use any flammable, acidy or alkaline materials or substances near the device, as this
may reduce the service life of the device and lead to deflagration when the device is turned
on.
Make sure that the bottom of the cookware does not scrape across the surface of the ceramic
field, although a scratched surface does not impair the use of the device.
Make sure that the device was properly cleaned before storing it in a dry place.
Problem and Solution
–
Error Code
Reason
Waiting status
Cooking field does not work
Solution
Place a suitable pot/pan onto the
induction cooking field. The plate
will work as usual
Please return the device for repair
E0
E1
E2
E3, E4
E5
E6
Use of wrong, too small a pot
Overheat protection
Voltage too low, too high
Open circuit
Ceramic plate is overheated
8
Use a correct pot
Allow the device to cool down, turn
it off completely and then on again
Connect the device to a correct
power outlet
Please return the device for repair
Allow the device to cool down, turn
it off completely and then on again
