UltraMini™ Eternal Lighting
User Manual 2018
Problem and Solution
Problem
Reason
Resolution
Device not work
No power
AC100V-240V,S0HZ/60HZ
Check the power connection, and
make sure device connect the mains
Is in well condition
.
Check if switch is on.
Check if the fuse is good.
Led bulb is off
led bulb damaged
Replacing led bulb
Led driver board damaged
Replacing led driver board
temperature switch damaged
Replacing temperature switch
Fans not work
Fans damaged
Replacing fans
Replacing fuse
Before replacing the fuse, disconnect the powercord
Step 1
:
Unscrew the fuseholder on the rear panel with a fitting screwdriver from the
housing (anti- clockwise)
Step 2
:
Remove the old fuse from the
fuseholder
Step 3
:
Install the new fuse in the fuseholder
Step 4
:
Replace the fuseholder in the housing and fix it
Unqualified
people involved with installation
,
operation and maintenance of the
UltraMini™
is prohibited.
If any above mentioned problem happened, or unknown problem happened,
please contact manufacture or distributor for assistance.
For more information, please contact Support by email at [email protected]
