Manual
ULTRA100™ www.Eternal Lighting.com
2 / 4
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOU INITIAL START - UP!
INTRODUCTION
Thank you for having chosen a led profile spot. You have acquired a powerful and versatile device.
Description of the device
1.
Profile
With the idea of energy saving and environment protection, the device use lower power loss and
extremely high efficiency led. The device housing cover is made of used the new high strength heat
resistance engineering plastics, with beautiful shape and smooth lines. The designing and
manufacturing is in compliance with the IEC standard. The device is suitable in the large-scale
theatrical performance, the theater, the performance hall, the bar, night club and so on.
2.
Safety warning
①
.warning
：
● Every person involved with the installation, operation and maintenance of this device has to be
qualified
● User must follow the instructions of this manual
● Unqualified person cannot open the housing cover and operate the device, or the dealer will not
accept liability for any resulting defects or problems.
● The device against rain and moisture
②
：
Warning notes
● Power supply: AC100V-240V/50HZ-60HZ
● Make sure the power switch is off, the power plug, outlet and the earth connection is in well
condition before connecting the device with the mains.
● Please use qualified power plug and outlet. Never connect the power cord of this device with other
electrical equipment.
● During move and installation, make sure the device not crashed with metal parts and other tough
materials.
● Always disconnect from the mains, when the device is on installation and dismantled
● The minimum distance between light-output and the illuminated surface must be more than 50cm.
● The device must only be installed on a non-flammable surface. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device. Please note that heat -sensitive objects may
be deformed or damaged by the emitted heat.
● During the operation the housing becomes very hot! Do not operate the device for 15 minutes after
switching off.
● The maximum ambient temperature Ta = 45
0
C must never be exceeded. The maximum housing
temperature Tb = 80
0
C must never be exceeded.
● For indoors use only.
● Replace any visible cracked protective shield, filters and lens.
