10
different ID value if you need use more than 1 group wireless net at same time in
same place.
3.
The red LED flashs when transmitter transmits DMX data by no interfered frequency
section, then receiver changes communicated frequency section. Green LED flash
till received corrected same ID value, LED flash more fast once DMX data more fast.
4.
Communication was established correctly then
Caution
：
Don‟t repair this R/T board by yourself, it should be returned to manufacturer to repair
if any problems.
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be
carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog
residue, dust, dew).
Trouble Shooting
Listed below are a few common problems the user may encounter, with solutions.
Unit does not respond to DMX:
1. Check that the DMX c
ables are connected properly and are wired correctly (pin 3 is “hot”; on
some other DMX devices pin 2 may be „hot‟). Also, check that all cables are connected to the
right connectors, it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1.
Quiet or high pitched sounds will not activate the unit. If problems are
not resolved, contact your dealer for service.
4.
Specifications
Model:
CUBE™ RGBA
Battery powered and DMX LED lighting fixture
LED display
