SAFETY AND INSTALLATION INSTRUCTIONS
120224-BT
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: [email protected]
Visit our website:
www.eterna-lighting.co.uk
LAMP REPLACEMENT:
Switch off the electricity at the mains.
Turn the lamp gently anti-clockwise and withdraw.
Remove and replace lamp making sure it’s the same type and wattage as stated on the re-lamping
label.
Switch back on mains supply.
REPLACEMENT LAMP TYPE:
Wattage:
4W
Supply Voltage:
240V
Size / Type:
GX53 LED lamp (LEDGX4)
EVENTUALLY, YOU MAY WANT TO REPLACE THIS LIGHT FITTING:
When your product comes to the end of its life or you choose to update or upgrade it by replacing
it, please do not dispose of it with your normal household waste and please recycle where facilities
exist. When you need to dispose of this fitting you can check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.
IF YOU EXPERIENCE PROBLEMS:
If your product is defective or develops a fault, please return it to the place where you bought it.
You can call our helpline for advice. The helpline will gladly give advice on any aspect of any Eterna
Lighting product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Model:
LED4WH
4W LED GX53 Under Cabinet Fitting
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
Pack contents:
1 x 4W LED lamp
1 x Surface mount fitting
complete with 2M mains lead
����