These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
Model:
HALFPIRBK
LED Half Lantern with 120° PIR
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Pack contents:
• Half lantern
• Mounting fixtures
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
LAMP SPECIFICATIONS:
Lumens total flux
420 lm
Lumens 120° flux
380 lm
Rated Wattage
7W
Rated luminous flux
380 lm
Nominal life time of the lamp
35,000 hrs
Colour temperature
3100K
Number of switching cycles
before premature lamp failure
≥15,000
Warm-up time up to 60 % of the
full light output
Instant full light
Dimmable
No
LED array dimensions (L/W)
130x35mm
Nominal beam angle
120°
Rated power
7W
Rated lamp lifetime
35,000 hrs
Lamp power factor
>0.5s
Lumen maintenance factor at
end of nominal life
≥0.70
Starting time
<0.1s
Colour rendering
≥80
Colour consistency
Within 6 step
Macadam ellipse
Rated peak intensity
110cd
Rated beam angle
120°
Voltage
240V
Not suitable for accent lighting
874/2012
MODELNO.
HALFPIRBK
PG 6
PG 1
Email: [email protected] / [email protected]
Visit our website:
www.eterna-lighting.co.uk
Made in China
Issue 1216