20
This multimeter displays DC voltage values as well
as their polarity. Negative DC voltages will display a
negative sign on the left of the display.
1.
Rotate the rotary switch to . Default is DC
measurement mode, and will be displayed.
Press
to switch into AC measurement
mode, and will be displayed.
2.
Connect the black test lead to the
terminal
and the red test lead to the
terminal.
Taking Measurements
Measuring AC or DC Voltage
Warning: Do not measure any voltage of over
1000V DC or 750V AC RMS to avoid instrument
damage or electric shock.
Do not apply more than 1000V DC or 750V AC
RMS between the common terminal and the
earth ground to avoid instrument damage or
electric shock.
Note:
During AC voltage measurement, long
press the
key once to enter the frequency
measurement mode, and long press it again to
return to the original measurement mode.
3.
Probe the test points and read the display.
Press
to enable and cycle through the
manual ranges.
Summary of Contents for MSR-A2000
Page 39: ...Notes ...
