background image

20

Federal Communication Commission  

Interference Statement 

FCC Radiation Exposure Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1) 

This device may not cause harmful interference, and 

(2) 

This device must accept any interference received, including interference that 

may cause undesired operation.

NOTE: 

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harmful interference to radio 

or television reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver. 

•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

•  Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 

environment. End users must follow the specific operating instructions for satisfying 

RF exposure compliance. To maintain compliance with FCC RF exposure compliance 

requirements, please follow operation instructions as documented in this manual. This 

transmitter must not be co-located or operating in conjunction with any other antenna 

or transmitter. The availability of some specific channels and/or operational frequency 

bands are country dependent and are firmware programmed at the factory to match the 

intended destination. The firmware setting is not accessible by the end user.

FCC Caution:

 Any changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate this equipment.

Summary of Contents for ESB4074C

























Reviews: