ETEKCITY EHD-55, User Manual

Page: 15 / 20

15
Troubleshooting
Problem Possible Solution
Hair dryer will not
turn on.
Make sure the hair dryer is plugged in.
Make sure the RESET button on plug is pressed in. (see page 6)
Hair dryer suddenly
stops working.
Overheat protection has been activated. Wait 10–20 minutes to allow the hair
dryer to cool, then turn it back on. The hair dryer should work normally.
Display shows Error
Code “E1”.
The heat sensor has malfunctioned. Real-time temperature cannot be displayed.
You will not be able to use Intelligent Temperature Control (TP), but you can still
use the hair dryer in Normal Mode.
Contact Customer Support (see page 18).
Display shows Error
Code “E2”.
Overheat protection has activated. Wait 10–20 minutes to allow the hair dryer to
cool, then turn it back on. The hair dryer should work normally.
Hair dryer stops
heating, but the fan still
works.
Overheat protection has activated. Wait 10–20 minutes to allow the hair dryer to
cool, then turn it back on. The heating functions should work normally again.
If your problem is not listed , please contact Customer Support (see page 18).