The Moving Head is fully operational in any mounting position, hanging upside-down,
side mounted, or set on a flat llevel surface, etc.
1.4 Product overview
2. SETUP
2.1 Mounting
▪
Linear dimmer 0 - 100%
▪
Various strobe 1-25 fps
▪
Pan/Tilt: 540° / 220°
▪
4-button LCD display
2
IMPORTANT!!! Safety cables must always be used when unit is celling or truss
mounted. The safety cable must be capable of holding 10 times the weight of the
fixture.
Control Panel
Power In/Out
ON/OFF
Fuse
DMX In/Out
The fixture is designed to work on AC 100-240V 50-60Hz. All units must be powered
directly from a switched circuit. This unit cannot be run on a rheostat or dimmer
circuit even if used solely for a 0% to 100% switching.
2.3 AC Power
WARNING!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
