background image

Tilting & Swiveling 

Flat Panel Wall Mount

Installation Guide

• Supports most 24” - 55” Flat Panel TVs

• Maximum weight capacity: 66 lbs.

• Supports VESA Sizes up to 400X400

• Easy installation

 

• 

Tilt range: +5 to -15 degrees 

 

• 

Swivel range: 180 degrees

• 

Extension range: 3.2” to 14.6”

Model: EXSM2455

 

This product Wall Mount frame is intended for use only with an apparatus which has a maximum weight of 77 lbs.  See apparatus 

instructions.  Using with an apparatus heavier than the maximum weight indicated may result in instability and cause possible 

injury.

READ THIS FIRST Read this entire manual!  Do not attempt to install this product if you do not understand the instructions. 

Contact a qualified mount installer if you have any doubts about a safe and secure mount installation, or if you are not sure what 

specific wall materials you are attaching this mount to.    Check  all  the  parts  carefully  to  make  sure  there  are  no  missing  or 

damaged parts.  Improper installation may result in damage to your TV, property, and personal injury.

• Rotation range: +5 to -5 degrees 

For technical assistance or troubleshooting please call 

1-855-994-383 or visit www.sibrandssupport.com

Summary of Contents for EXSM2455













Reviews: