Remote control
Some features contained in this DVD player are
related to theDVD Disc's software.
Some features cannot be performed if the disc does
not support the feature, or requires special settings.
Check the features printed on the disc's packing or
follow the instructions of the Disc's on screen menu.
REMARK
Some features of the player can only be performed
by the remote control.
Some features described in this owner's manual are
related to the Disc's encoding.
Some features may not be available, if the disc
encoding does not support the feature.
INTRODUCTION
1)
POWER
2)
OPEN/CLOSE
3)
4)
MUTE
5)
DISPLAY
6)
SLOW
7)
8)
REPEAT
9)
10)
ZOOM
11) PROGRAM
12)
13)
SEARCH
14)
MOVE UP
15)
SOURCE
16)
SETUP
17)
ENTER
18)
MOVE LEFT
19)
MOVE RIGHT
20)
21)
PROLOGIC
22)
STOP/BAND
23)
MOVE DOWN
24)
PLAY/PAUSE
25)
SELECT
26)
NEXT
28)
29)
PREVIOUS
30)
VOLUME
-
31)
32)
LANGUAGE
33)
ANGLE
34)
TITLE
35)
RETURN
36)
P/N
37)
27)
38)
39)
-5-
Loading batteries to the remote control
●
Remove the battery compartment cover.
Make sure that the batteries have been inserted
in the correct polarities matching to the symbols
+, - marked in the battery compartment. Close
the battery compartment cover.
When replacing batteries, replace both batteries.
Do not mix new and used batteries operating
together, otherwise, the operation lifetime will
be much shorter than normal.
Remove the batteries if the unit will not be used
for a prolonged period of time.
The remote control transmits a directional
infrared beam.Be sure to aim the remote
control directly at the infrared sensor of the
unit during operation.
If the sensor has been covered or there is a
large object between the remote control and
the sensor, the sensor will not respond.
The sensor may not able to receive the
remote signal when it is exposed to direct
sunlight or a strong artificial light (fluorescent
or strobe light). In this case, change the
direction of the light or reposition the unit to
avoid direct lighting.
●
Load two AAA batteries into the
battery compartment.
●
●
●
INTRODUCTION
30
30
Within approximately
6 meter (20 feet)
-6-
RESET
1
3
2
4
5
6
8
9
13
14
11
10
12
16
19
21
15
18
20
17
23
25
27
22
24
26
29
28
31
30
33
32
35
34
37
36
39
38
7
NUMBER 10+
0-9NUMBER
REPEAT A-B
BACKWARD/SCAN-
FORWARD/SCAN+
STEP/P-SCAN
MENU/PBC
L/R/ST
SUBTITLE
Notes
The remote control transmits a directional infrared beam. Be sure to aim
the remote control directly at the infrared sensor during operation. When
the sensor is covered or there is a large object between the remote control
and the sensor, the sensor cannot receive signals.
The sensor may not be able
to receive remote control signals properly when it is exposed to direct sunlight or
strong artificial light. In this case, re-position the direction of the unit to avoid
direct light.
POWER
"A
A
A
"
1
.5
V
x
2
BE ENVIRONMENTALLY FRIENDLY
Dispose of all batteries properly
