background image

Safety Instructions

16. Safety Check

Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine 
whether the product is in proper operating condition.

17. Wall Mounting

The TV should be mounted to a wall only by a professional.  The TV may slide or fall, causing serious injury to a child 
or adult, and serious damage to the product
Wall hanging height of the whole machine shall not exceed 2m.

. Warranty shall be voided.

18. Heat

The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products 

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric 

should be connected to the grounding system of the building, as close to the point of the cable entry as practical.

This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 

electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try 
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.                                                                                                                       
- Increase the separation between the equipment and television.
- Connect the equipment into an outlet on a circuit different from that to which the television is connected.
- Consult your dealer or an experienced radio / TV technician for assistance.

authority to operate the equipment.

guarantee that interference will not occur in a particular installation. If this television does cause interference to other

(including amplifiers) that produce heat.

19. Remote Control

Do not expose the remote control to liquids, direct sunlight or sources of excessive heat.

 

Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground

Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s

                                                                                
  Never place a television set in an unstable location. A television set may fall, causing serious personal injury or 
death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the 
  furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and 
  supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

•                     This equipment is a Class II or double insulated electrical appliance. It has been designed in 
                      such a way that it does not require a safety connection to electrical earth.

4

Summary of Contents for 43EF20









































Reviews: