TV Settings
TV Provider Setup
& Channel Auto Scan
To enter the Channel Menu:
•
Press the
MENU
button
•
Using the
arrow buttons; scroll to highlight
Channel
•
Press the down arrow buttons to highlight
Air / Cable
Select
Cable
if you subscribe to a pay television service
WITHOUT
a set top box.
•
Press the
arrow buttons to highlight
Cable
.
•
NOTE: Channel Auto Scan may take several minutes to complete.
Cable Mode
Air Mode
Select
Air
when TV is connected to an indoor / outdoor antenna.
•
Press the
arrow button to highlight
Air
.
•
NOTE: Channel Auto Scan may take several minutes to complete.
NOTE: For Cable or Satellite users WITH a set-top box, there is no need to run Channel Auto
Scan. Connect your cable or
satellite set top box to one of the available inputs on the TV for
viewing.
Press the arrow button to highlight
Auto Scan
and press
ENTER.
Press
ENTER
to begin
Auto Scan
.
Press the arrow button to highlight
Auto Scan
and press
ENTER.
Press
ENTER
to begin
Auto Scan
.
After the Setup Wizard has been completed, please skip this page as your Cable/Antenna
is already set up. The following instructions on this page are provided if you need to make
changes at a later time.
19
