409-35011
Rev D
7
of 83
To provide a safe condition for maintenance or repair, rotate the main power switch to the OFF position
(as shown in Figure 4) and lock it there by inserting a padlock (not included) into the locking locations.
Figure 4: Locking out electrical power
d
= 4-8 mm [0.16-0.31 in]
b
≤
47 mm [1.85 in]
CAUTION
Always turn off the main power switch and disconnect the electrical cord from the power source when performing repair or
maintenance on the equipment.
Lock out electrical power when performing maintenance or repair on this equipment.
