Extreme Tactical Dynamics ©, 2018
page:
2
•
Plug three-pin harness in
•
Ground unit
•
Extend red wire to pre-existing switch box
Controlling Strobe Tube Kit
•
Plug three-pin harness into the light’s control input socket
•
Connect all wires to positive connection
Strobe Kit Flash Patterns
•
Provide positive power to yellow, blue, and green wires
•
Tap the violet wire to the black wire
•
Cycle through flash patterns
Failure to follow installation or wiring instructions could result in light failure, damage to the unit, or even
serious injury. Make sure to consult vehicle manufacturer diagrams before beginning wiring or installation
work.
