-3-
Ⅰ
.Introduction
ETCR1000C
、
ETCR1000D Non-contact Phase Detector breakthrough
the traditional method of phase detection. The traditional method is to
connect three exposed clips or probes to three bared live wires, so it need
to disconnect the three phase wires. While ETCR1000C
、
ETCR1000D
Non-contact Phase Detector adopts non-contact measurement, no need to
disconnect wires, no need to touch high voltage bared live wires. With the
three clamps clip on the insulation layer of three phase live wires, then the
phase can be detected, meanwhile sound and light indicating positive or
negative states. Instrument base plate is provided with a magnet, the
operation more convenient.
ETCR1000C
、
ETCR1000D Non-contact Phase Detector also have the
functions of live wire examination, power inspection, phase deficiency
judgment, breakpoints finding, breakpoints positioning.