ETC Installation Guide
Forward-Phase Dimmer–Gen 2
Connect Power Input and Dimmer Output
The power input wiring exits the Forward-Phase Dimmer–Gen 2 through the
knockout mount on the enclosure.
1.
Connect the power input wiring. The dimmer is supplied with inputs
specific to the input voltage, either 120 VAC or 277 VAC.
a.
Connect the green/yellow striped wire (14 AWG) from the
controller to the ground wire from the breaker panel and the
ground wire from the lighting load.
b.
Connect the white wire (14 AWG) to the incoming neutral wire
from the breaker panel and the neutral wire of the lighting load.
c.
Connect the black power input wire (14 AWG) to the line input
feed wire (hot) from the breaker panel.
2.
Connect the red dimmed output wire (14 AWG) to the dimmed line of
the lighting load.
Black 120 VAC
or 277 VAC
Neutral
White
Red
Load
Dimmer
Green/Yellow
White
Black
Green/Yellow
Ground
EchoConnect
3.
Reinstall the junction box cover plate.
Forward-Phase Dimmer–Gen 2
Page 7 of 12
ETC