14
Source Four XT HID Zoom User Manual
Cleaning the reflector
To quickly clean the reflector, remove the lens tube and clean the dust from the reflector with a blast
of oil-free air. You may also wipe the reflector with a clean lint-free cloth. If either method is not
sufficient, follow these steps. Refer to
Figure-13
.
Step 1:
To protect the lamp during cleaning, remove the lamp assembly. Refer to
Replacing the
HID Lamp, page 3
.
Step 1:
Remove the barrel.
Refer to
Removing and Installing the Barrel, page 6
.
Step 2:
Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. Isopropyl
alcohol, distilled water or a 50%-50% mixture of each can be used to clean the glass
surface.
Step 3:
Gently wipe the reflector.
Step 4:
Reinstall the barrel.
Step 1:
Reinstall the lamp assembly.
W A R N I N G :
Disconnect power and allow the lamp to cool down before attempting to
clean the reflector.
