6
Source Four PAR Assembly Guide
Step 12: Hold the lens by the edge and position it so the wave side faces the rear of the
fixture. See
.
Step 13: From the top of the fixture, slide the lens behind the lens catchers and position it
behind the tabs on the bottom of the lens rotator ring.
Step 14: Gently push the top of the lens inward until it snaps behind the spring clip.
Step 15: Install the lamp socket assembly (
See “Assemble lamp socket” on page 3.
) to the
barrel housing assembly and secure with brass knurled screw on rear of lamp
socket assembly.
Cleaning the reflector
Step 1:
Remove the lens to expose the reflector so you can access it from the front of the
luminaire.
Step 2:
Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth.
Isopropyl alcohol, distilled water or a 50%-50% mixture of each can be used to
clean the glass surface.
Step 3:
Reinstall a lens before using the luminaire.
Cleaning the lens
Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. Isopropyl alcohol,
distilled water or a 50%-50% mixture of each can be used to clean the glass surface.
W A R N I N G :
Do not use ammonia-based or other harsh commercial cleaners. Clean
reflector only as directed.
Commercially available glass cleaning agents should be avoided as they
may contain ammonia, other harsh chemical detergents or abrasive agents.
These cleaners may damage the glass surface and the Anti-Reflective
coatings. Do not immerse or soak the glass in any cleaning solution.
W A R N I N G :
Do not use ammonia-based or other harsh commercial cleaners. Clean lens
only as directed.
Commercially available glass cleaning agents should be avoided as they
may contain ammonia, other harsh chemical detergents or abrasive agents.
These cleaners may damage the glass surface and the Anti-Reflective
coatings. Do not immerse or soak the glass in any cleaning solution.
Spring clip
Retaining clip
Lens Catcher
Spring clip
Retaining clip
Tab
Figure 6
Summary of Contents for Source Four PAR EA
Page 10: ...8 Source Four PAR Assembly Guide...
Page 11: ...Housing Assembly 9...
