4 of 5
ETC
®
Source Four LED Series
C o n t r o l o P t i o n S
DMX input channel profiles
DmX
Profile
DmX
Channels
Channel
assignments
notes
Direct
10
1 – red
2 – White
3 – amber
4 – Green
5 – Cyan
6 – Blue
7 – indigo
8 – intensity
9 – Strobe
10 – fan Control
Direct control of each individual
color with a separate master
intensity channel. Color calibration
of leDs is not active in this mode.
this profile will produce additive
color crossfades.
HSi
6
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
High-resolution hue (two
channels), saturation, and intensity
control. HSi mode will produce
color crossfades around the color
space.
HSiC
7
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
7 – Color Point
(CCt)
High-resolution hue, saturation
and intensity control as above,
with the addition of a color-
point channel to adjust the color
temperature of the fixture in
both white light and color. Color
crossfade performance is the same
as HSi.
rGB
6
(Ch. 4
not used)
1 – red
2 – Green
3 – Blue
4 – n/a
5 – Strobe
6 – fan Control
effectively addresses all seven
colors via three channels of
control. rGB profile will produce
additive color cross-fades.
Studio
6
(Ch. 4
not used)
1 – intensity
2 – Color Point
(CCt)
3 – tint
4 – n/a
5 – Strobe
6 – fan Control
Controls fixture as a white-light
unit. if no DmX (i.e. console input)
is present, fixture can be adjusted
for these three parameters on the
U/i at the back of the unit.
additional profile options
Plus 7
Seven additional color-control channels are available in
rGB, HSi, and HSiC input profile settings. for example,
HSi with ‘Plus 7’ enabled becomes a 15-channel profile:
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
7 – n/a
8 – Plus7
Control on/off
9 – red
10 – White
11 – amber
12 – Green
13 – Cyan
14 – Blue
15 – indigo
the desired color and intensity
is achieved by using the HSi or
rGB channels
Placing channel seven at a value
over 51% gives the fixture a
15-channel profile.
Channels 9-15 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine-
tune the color output.
Strobe
Variable strobe control: 0% is no strobe. the fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
Source Four LED
™
C o n t r o l o P t i o n S
User settings on Source four leD fixtures allow multiple operational
modes and settings for either console operation via DmX protocol
or stand-alone operation. the expanded lCD display provides easy
navigation to all possible settings and options. Some of the setting
options are:
•
multiple DmX choices, ranging from a simple rGB
profile – which effectively controls all seven leD colors via
three channels – to nine-channel ‘direct’ color and
intensity control
•
multiple dimming curve options
•
Preset colors and sequences for stand-alone (no-console-
required) operation
•
White-point selection – white light and color behavior based
on a specific color temperature white light, i.e. 3200K,
5600K, etc.
•
loss of data behavior options – instant off, hold last look for
two minutes, etc.
•
output modes – three output options that offer the user a
choice between maximum output and maximum consistency
See the user manual for a complete explanation of all of the control
settings and options for the Source four leD.
Quick Setups
to assist in managing the numerous control and fixture behavior choices, five
combinations of operational settings are available to quickly get started. these
settings are specifically created for different applications and are easily accessible at
the fixture display. each setting can then be modified as required to take advantage
of all of the possible control features.
Setting
title
Profile
Description
typical features*
General
Direct
factory Default:
for general-purpose
use, including interior
architectural applications
• Standard dimming curve
• Regulated output for
color consistency
Stage
HSi
Plus 7
enabled
theatrical lighting:
Duplicates the color and
dimming behavior of
tungsten stage lighting
fixtures
• Incandescent dimming
curve
• Regulated output for
color consistency
• 3200K white-point
setting
Xt arch
HSi
exterior architectural lighting:
Provides a high degree of
color consistency in high
ambient temperature
environments
• Standard dimming curve
• Protected output
• 3200 white-point setting
High
impact
rGB
event lighting:
enables quickest response,
simple rGB control and
strobe channel for maximum
effect usage
• Quick dimming curve
• Boost mode for
maximum intensity
• 5600K white-point
setting
Studio
Studio
Studio factory Default:
enables three parameter
control of white light
(intensity, white point, and
tint) via DmX from console
or from fixture display – no
console required
• Linear dimming curve
• Regulated output mode
for color consistency
*See user manual for complete list of features for each Quick Setup
