Configure the Fixture
19
Select Input
Navigate: Main Menu
→
Set
→
Select Input
Select the control input for the fixture:
•
DMX Only
•
Art-Net on IP2
•
Art-Net on IP10
•
sACN
Set Universe for Art-Net and sACN
Navigate: Main Menu
→
Set
→
Set Universe
When using Art-Net control input, set a universe value of 000–255.
When using sACN control input, set a universe value of 001–255.
Access Service Settings
Navigate: Main Menu
→
Set
→
Service Settings
Parameter
Value
Description
Service PIN
Service PIN XXX
You must enter the Service PIN in order to access the
other Service Setting parameters. The default Service
PIN is 050.
RDM UID
Manufacturer ID
and fixture serial
number
This password-protected menu item lets you modify
the RDM UID. You must enter the Service PIN to
access this menu item.
Note: Remote Device Management (RDM) requires
that all RDM devices have a unique identifier (UID)
that consists of the manufacturer ID and serial
number. Modifying this setting can break the RDM
capability of this fixture.
Duplicate RDM UIDs on the same DMX control run
will result in a data collision, causing a
communication failure. Ensure that all fixtures have a
unique RDM UID if RDM functionality is to be used.
If DMX splitters are used and RDM control is to be
used, these splitters must support RDM.
Ethernet IP
XXX.XXX.XXX.XXX
This password-protected menu item lets you modify
the IP address. You must enter the Service PIN to
access this menu item. The default IP address is
002.142.058.034.
Ethernet Mask IP
XXX.XXX.XXX.XXX
This password-protected menu item lets you modify
the IP subnet mask. You must enter the Service PIN
to access this menu item. The default IP subnet mask
is 255.000.000.000.
Clr Err Info
•
ON
•
OFF
This password-protected menu item lets you clear
error messages after you have fixed the errors. You
must enter the Service PIN to access this menu item.
Set this parameter to ON in order to clear the error
messages. The default setting is OFF.