ETC Power Control Processor, Configuration Manual

Page: 8 / 64

2 Power Control Processor Configuration Manual
Using This Manual
Along with basic maintenance and service procedures for long lasting performance, this
manual contains information on using the Power Control Processor with the following
products:
• Echo Relay Panel Mains Feed (ERP)
• EchoDIN
• Echo Relay Panel Feedthrough (ERP–FT)
• Sensor IQ Intelligent Breaker System
Each of these products provides professional quality switching of dimmed and non-dimmed
loads controlled by DMX512, Ethernet, or the Echo line of stations. This manual contains the
procedures for operation, service, and maintenance of each of these panels and their
associated options.
Symbols
The following symbols are used throughout this manual to alert you to danger or important
information.
Please email comments about this manual to: TechComm@etcconnect.com .
Note:
Notes are helpful hints and information that is supplemental to the main text.
CAUTION:
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
WARNING:
A Warning statement indicates situations where damage may occur, people
may be harmed, or there are serious or dangerous consequences of an action.
WARNING:
RISK OF ELECTRIC SHOCK! This warning statement indicates situations where
there is a risk of electric shock.