M520 series oscilloscope with rollmode
User’s Guide
3. Basic information
3.1. Front panel layout
Channel A, channel B, external ARM input and LED are accessible on the
front panel.
Fig. 3.1.1. – Front panel
If the LED color is:
- green, the device is configured and there is no communication with a
computer in this moment
- orange, the device communicates with a computer
- red, device is powered, but not configured
3.2. Basic terms
This Chapter explains the basic terms used throughout the text.
Click
– Position the mouse cursor over the chosen object. Then press and
release the left mouse button.
Double-Click
– Two successive clicks.
Drag
– Position the mouse cursor over the object you want to move. Then
press the left mouse button and hold it down. The chosen object moves with the
mouse cursor. After releasing the mouse button the object moves to the new location.
Enter the value into the edit box
– Click the edit box. Use the keyboard to
enter the desired value and confirm by pressing “Enter”.
Insert the value into the edit box
– Click the edit box. Use the keyboard to
enter the desired value.
Set the value using the scroll bar
– It is possible to change a value by simply
dragging the scroll bar slider. Clicking the arrows of the scroll bar increases or
decreases the value by minimal steps. Clicking in between the slider and the arrows
changes the value by larger steps.
Select the value from the combo box
– Open the list of all possible values of
the edit box by clicking it. Then set the desired value by clicking it.
- 9 -
