ETC Emphasis Lighting Control System, User Manual

Page: 89 / 292

4
Live Editing 79
Solo
The solo function can be used to suppress the levels of unselected channels. This is helpful
if you want to temporarily change the stage look to just a few channels, or record a cue,
group or submaster containing only a few of the channels in the current stage look.
Set levels using [S3 - Solo]:
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 2: Set levels using the procedure described in Set Levels, page 75 .
Step 3: Press <S7 - More Softkeys> [S3 - Solo] . In Stage and Fader, all unselected
dependent channels will be temporarily set to zero level. In Blind, all unselected
channels will be set to zero level.
Step 4: In Stage, press [S3 - Solo] again to restore levels for unselected channels. In
Blind, press [Release] to restore recorded levels.
N o t e :
In Blind, pressing [S3 - Solo] again clears all levels, regardless of channel selection.