ETC Element Classic, User Manual

Page: 118 / 687

104 Ion Classic User Manual
•
Show Reference Labels - When enabled, referenced record targets (such as presets or
palettes) with labels will have their labels displayed rather than their target type and
number. This setting will only affect the selected instance of Live/ Blind. There is an
option in setup, which determines the default that will be used when tabs are opened. It
is modified from there in the configuration menu. See
Show Ref Labels (on page 214)
.
Note:
[About] & [Label] can be used to temporally toggle between views.
•
Group Channels By 5 - When enabled, five channels are grouped together with space
separating each group of five. This setting is enabled by default.
•
High Contrast - When enabled, high contrast brightens the magenta used to show
tracked values. This setting is enabled by default.
•
Disable 100 Channel Display Mode - Disables 100 Channel Display Mode (default).
•
Enable 100 Channel Display Mode - 5x20 - Enables 100 Channel Display Mode, in 5
rows of 20 channels.
•
Enable 100 Channel Display Mode - 4x25 - Enables 100 Channel Display Mode, in 4
rows of 25 channels.
Default
You can save your settings as a default state for Live/Blind. The default is identified with
parentheses.
•
Reset to Default - Will restore the settings to the default state. Live/ blind tabs will
normally default to the settings for Tab 1.0, if no other tab has been assigned as default.
•
Set Current as Default - Allows you to set a Live/ Blind tab other than 1.0 as the default.
The default tab will be shown in parentheses , for example (Tab 1).
•
Reset to Eos Default - Restores the settings to Eos defaults.
Using Flexichannel
Flexichannel (use of the [Flexi] key) allows you to view only channels meeting a certain criteria
in the Live/ Blind display, therefore removing unwanted data from view. Press and hold [Flexi]
to see and select from a list of available states and modes in the CIA. You can also press [Flexi]
multiple times to cycle through the list of available states.
Flexichannel has several available states which include allowing you to view only:
•
All channels
•
All patched channels
•
Manual channels
•
All show channels (any channels that have data stored in a cue or submaster)
•
Active channels (channels with intensity above zero or a move instruction)
•
In Use Channels (channels with intensities that are above zero or fading to zero, running
effects, non-intensity moves, or marking.)
•
Selected channels
•
Channels with discrete timing
There are three Flexichannel modes, which can be used along with the Flexichannel states:
•
Cells off (displays only the master channels for multicell fixtures. Master channels will
display with a "." after the channel number to indicate that they have cells hidden.)
•
Masters Off (displays only the cells for multicell fixtures)
•
Partitioned (displays only those channels defined in the current partition)