17
ElahoTouch User Manual
Pick the value box with one press to open a filmstrip view of the available settings. The filmstrip
may be scrolled left or right to see all the choices.
The second page displays a cross hair pan and tilt control. Tap the tab twice to get to the second
page.
A white dot is used to indicate the current location. The actual pan and tilt values will display
above the Nudge button. Press anywhere within the crosshairs to move your device.
For fine control of pan and tilt, use the Nudge button. See
for more information.
Recording a Position Palette
Record a position palette to easily recall position parameters for one or more fixtures.
1.
Set the position parameters accordingly for the fixture or fixtures you wish to record.
2.
Tap the Position tab to open the position palette page.
3.
Press the Record Palette button.
4.
Press Include Options to choose to record for all channels, or only the ones currently
selected.
5.
Pick a palette chip to record, or press Cancel to exit without saving. Light gray chips
contain palette information; those in dark gray are blank.
6.
Press and hold on the palette chip to add a label in addition to the palette number.
Using Position Palettes
In order to use a recorded position palette, select the channel(s) you wish to apply the palette
to, navigate to the position palette page, and tap the palette you wish to apply. To revert to
defaults, home the channel(s).
Nudge
Nudge allows for fine control of
and
parameters.
The Nudge button is available on the second page of position parameter control and on the first
page of colormix parameter control.
