Echoflex Installation Guide
Switch-mount Occupancy Sensor
Station Configuration
The Dual Tech Switch-mount Occupancy Sensor has on-board switch and
button settings that are available from the front of the station when it is
installed and the wall plate is removed.
Program Mode
Press and hold the
[Walk Test]
button 3 seconds to enter Program
Mode
Function switch
Preset
Custom
Zone
Program Mode
Program Mode allows adjustment of the consecutive range of presets or
zones assigned to the station. Placing the station in Program Mode allows you
to set a new starting preset or zone number for the station.
The programmed preset or zone that is associated to the first button control
is also the event/action that will occur with occupancy and vacancy detection.
Reference
Program Preset Start (Basic Mode, Preset or Zone) on page 13
Function switch
The Function switch determines how the controls of the sensor function. It has
behavior settings of Preset, Custom, and Zone.
Function switch: Preset
Setting the Function switch to Preset allows you to perform preset related
actions dependent on the switch-mount sensor type. Reference
for complete details of the button actions when
the switch-mount sensor is placed in Preset mode.
Preset Toggle Functionality
Preset toggle control functionality allows you to toggle the preset on and off
by pushing the assigned preset button.
•
A single button push activates / deactivates the preset that is assigned
to that button using a two second fade time.
•
A double button push activates / deactivates the preset that is
assigned to that button using a 1/2 second fade time.
Dual Tech Switch-mount Occupancy Sensor
Page 11 of 20
Echoflex Solutions, Inc.
