ETC Echo Inspire Station Programming Manual Download Page 13 | Manualshive

Page: 13 / 44

background image

Record/Program Mode

9

Record/Program Mode

Program mode allows adjustment of the consecutive range of presets and zones assigned to
the station by allowing you to set the starting preset or zone, respectively. Enter program
mode by pressing and holding the

[Record / Program Mode]

for three seconds.

The Function switch determines whether edits are made to the consecutive range of presets
or zones. Program adjustment is not available while in Custom Mode. In the case of the 4
button station, the dip switch selection also determines what is programmed to the station.

Record allows snapshot of all current output levels into the designated preset for playback.
Reference

Record Preset

Program Preset Start

Step 1: Set the station into Preset control mode by sliding the Function switch to its highest

position.

Step 2: Press and hold the

[Record / Program Mode]

button for three seconds to enter

Program mode. The “Mode” LED illuminates (steady amber) and the first preset
button LED for the station flashes the current (first) preset controlled. (For example,
if the first preset controlled is preset 3, the button LED will flash 3 times.)

Step 3: Push any station button to increase the starting preset number by one, the count

always begins at 1. The station will update the LED indication, flashing the LED to
reflect the new preset number. (For example, pushing the station button eight times
will set the first preset for the station to preset 8). All station preset controls will be
consecutively assigned beginning with the specified count.

Step 4: When the desired preset number is set, press and release the

[Record / Program

Mode]

button to save the new setting. The “Mode” LED turns off and the station

LEDs will display the new setting before returning to normal operation.

Record Preset

Inspire stations provide recording (snapshot) of presets using the current output levels for the
controlled zones in the space. The station must be set up for Preset control prior to recording.

Step 1: Press the

[Record / Program Mode]

button, an amber LED will blink during a 10

second record period.

Step 2: Push the button of the preset control you would like to record (snapshot). This stores

current levels to the designated preset, exits record mode, and activates the newly
recorded preset.

Note:

Program mode is non-functional and does not apply while the Function

switch is set to Custom.

Note:

To change the preset button assignment to a lower number than what is

currently set, exit Program Mode then reenter Program Mode and the preset

count will restart at 1.

«
...
11
12
13
14
15
...
»

Summary of Contents for Echo Inspire Station













































Reviews:

No comments

Related manuals for Echo Inspire Station

Brand: K&K Pages: 6

Brand: BEIER-Electronic Pages: 22

7000-2 - Escalade RAID Controller

Brand: 3Ware Pages: 2

Brand: jablotron Pages: 22

Brand: jablotron Pages: 2

Digiplex DGP-848

Brand: Paradox Pages: 20

Brand: Madison AV Pages: 2

Brand: CAME Pages: 2

Brand: Danfoss Pages: 16

Consolidated 2900-40 Series

Brand: Baker Hughes Pages: 80

Brand: Wilo Pages: 128

Sysmac NX-TBX01

Brand: Omron Pages: 172

Brand: WEST Pages: 2

Brand: J+J Pages: 6

Brand: Rare Waves Pages: 18

Brand: Pacostar Pages: 55

Brand: FUTABA Pages: 16

Brand: Patton Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands