ETC Installation Guide
Dual Tech Vacancy Sensor
Settings
DIP switches
Space and Address
switches
The Echo Dual Tech
Ceiling-mount
Vacancy Sensor
participates in an
Echo control system
using the configured
Space and Address,
which are selectable
using the rotary
switches on the sensor electronics located behind the removable cover.
Note:
When the sensor is placed into Custom configuration mode,
DIP switch 2 set to On, all other DIP switch settings are ignored.
Note:
The [MODE] and Auxiliary [A] buttons, and their related LEDs,
are not used and have no functionality on the Dual Tech Ceiling-
mount Vacancy Sensor.
Set Space and Address
Two rotary switches on the sensor electronics provide for Space and Address
assignment for the sensor. By default, these switches are set to Space 1,
Address 1. Commands are shared by all devices within a given space.
1. Set the Space rotary switch to the desired number (1 through 16) for
the space you want the sensor to control.
2. Set the Address rotary switch to desired address (1 through 16) for the
sensor identification in the selected space.
Note:
Do not duplicate a device Address within the same Space.
Dual Tech Vacancy Sensor
Page 6 of 12
ETC
