E T C D e s i r e Q u i c k G u i d e
Desire D22, D40, D40XT, D60 v1.7.0
D22, D40, D40XT, D60 v1.7.0 Quick Guide
Page 7 of 10
Electronic Theatre Controls, Inc.
D40XT, D40, and D60 – Studio Tungsten, and Studio Daylight
D22 - Studio Tungsten and Studio Daylight
Plus 7
Adds seven additional color control channels to RGB, HSI, and HSIC input profile
settings. For example HSI with ‘Plus 7’ enabled becomes an 15-channel profile:
1 – Hue (coarse)
2 - Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
7 – n/a
8 – Plus 7 Control on/off
9 – Red
10 – Orange (white if
Lustr+)
11 – Amber
12 - Green
13 - Cyan
14 - Blue
15 -Indigo
The desired color and intensity are achieved by using
the HSI or RGB channels
Placing channel eight at a value over 51% gives the
fixture a 15 channel profile.
Channels 9-15 represent the native colors of the fixture
and allow the operator to adjust individual color
channels to fine tune the color output.
Strobe
Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as
the strobe-channel value approaches 100%.
DMX
Profile
DMX
Channels
Channel
Assignments
Notes
Studio
3
1 - Intensity
Direct control of each individual color with a separate master
intensity channel. Color calibration of LEDs is not active in this
mode. The ten-channel profile will produce the highest quality
color cross fades.
2 - Strobe
3 - Fan Control
(D60 only)
Direct
3
1-Intensity
2-Strobe
3-Fan Control
(D60 only)
