4 of 5
ETC
®
Profile Spotlight Series
C o n t r o l o P t i o n S
DmX input Channel Profiles
DmX
Profile
DmX
Channels
Channel
assignments
notes
Direct
10
1 – red
2 – White
3 – amber
4 – Green
5 – Cyan
6 – Blue
7 – indigo
8 – intensity
9 – Strobe
10 – fan Control
Direct control of each individual
colour with a separate master
intensity channel. Colour calibration
of leDs is not active in this mode.
the ten-channel profile will produce
the highest quality colour cross-
fades.
HSi
6
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
High resolution hue (two-channels),
saturation, and intensity control. HSi
mode will produce arbitrary colour
cross-fades around the colour
space.
HSiC
7
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
7 – Colour Point
(CCt)
High-resolution hue, saturation and
intensity control as above, with the
addition of a colour point channel
to adjust the colour temperature
of the fixture in both white light
and colour. Colour cross-fade
performance is the same as with
HSi mode.
rGB
6
(Ch. 4
not used)
1 – red
2 – Green
3 – Blue
4 – n/a
5 – Strobe
6 – fan Control
effectively addresses all seven
colours via three channels of
control. rGB profile will produce
medium quality colour cross-fades
Studio
6
(Ch. 4
not used)
1 – intensity
2 – Colour Point
(CCt)
3 – tint
4 – n/a
5 – Strobe
6 – fan Control
Controls fixture as a white light
unit. if no DmX, i.e. console input,
is present, the fixture can be
adjusted for these three parameters
on the U/i at the back of the unit.
additional profile options
Plus 7
Seven additional colour control channels are available in
rGB, HSi, and HSiC input profile settings. for example
HSi with ‘Plus 7’ enabled becomes a 15-channel profile:
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – fan Control
7 – n/a
8 – Plus7
Control on/off
9 – red
10 – White
11 – amber
12 – Green
13 – Cyan
14 – Blue
15 – indigo
the desired colour and intensity
is achieved by using the HSi or rGB
channels
Placing channel seven at a value
over 51% gives the fixture a
15-channel profile.
Channels 9-15 represent the
native colours of the fixture and
allow the operator to adjust
individual colour channels to fine
tune the colour output.
Strobe
Variable strobe control: 0% is no strobe. the fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
Source Four CE LED
®
C o n t r o l o P t i o n S
User settings on Source four leD fixtures allow multiple operational
modes and settings for either console operation via DmX protocol
or stand-alone operation. the expanded lCD display provides easy
navigation to all possible settings and options. Some of the setting
options are:
• multiple DmX choices ranging from a simple rGB
profile – which effectively controls all seven leD colours via
three channels – to nine-channel ‘direct’ colour and
intensity control
• multiple dimming curve options
• Preset colours and sequences for stand-alone (no console
required) operation
• White point selection – white light and colour behavior based
on a specific colour temperature white light, i.e. 3200K,
5600K, etc
• loss of data behavior options – instant off, hold last look for
two minutes, etc
• output modes – three output options that offer the user a
choice between maximum output and maximum consistency
See the user manual for a complete explanation of all of the control
settings and options for the Source four leD.
Quick Setups
to assist in managing the numerous control and fixture behavior
choices, five combinations of operational settings are available to
quickly get started. these settings are specifically created for different
applications and are easily accessible at the fixture display. each
setting can then be modified as required to take advantage of all of
the possible control features.
Setting
title
Profile
Description
typical features*
General
Direct
factory Default:
for general purpose
use including interior
architectural applications
• Standard dimming curve
• Regulated output for
colour consistency
Stage
HSi
Plus 7
enabled
theatrical lighting:
Duplicates the colour
and dimming behavior of
tungsten stage lighting
fixtures
• Incandescent dimming
curve
• Regulated output for
colour consistency
• 3200K white point setting
Xt arch
HSi
exterior architectural lighting:
Provides a high degree
of colour consistency in
high ambient temperature
envionments
• Standard dimming curve
• Protected output
• 3200 white point setting
High
impact
rGB
event lighting:
enables quickest response,
simple rGB control and
strobe channel for maximum
effect usage
• Quick dimming curve
• Boost mode for
maximum intensity
• 5600K white point setting
Studio
Studio
Studio factory Default:
enables three parameter
control of white light
(intensity, white point, and
tint) via DmX from console
or from fixture display – no
console required
• Linear dimming curve
• Regulated output mode
for colour consistency
*See user manual for complete list of features for each Quick Setup
