ETC
75
5. MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the
motor.
This equipment was manufactured for long-term operations with minimal maintenance.
Continuous and satisfactory operations depend on a correct care and regular cleaning of
your equipment.
Cleaning
•
Regularly remove sawdust.
•
Operate the saw with an attached vacuum cleaner.
•
If the dirt does not come off use a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
Replacing the carbon brushes
Fig. E
•
Remove the screws (1).
•
Withdraw the carbon brushes (2) from the circular handsaw and inspect them for
wear.
•
Place the carbon brushes back in the brush holders provided.
•
Check that the copper contact on the carbon brushes makes good contact with the
copper part in the brush holder.
•
Replace the screws (1) and tighten them firmly.
Frequent use will cause the carbon brushes to wear down. Regular inspection,
after every 30 hours of use, is essential. If the brushes have worn down to less
than 4 mm, replace.
Lubrication
The machine does not require any additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact your reseller. On the
separately enclosed spare parts list you can find an overview of the parts that can be
ordered.
Troubleshooting
Below we have listed a few probable causes and solutions to which you can refer if your
circular saw does not function properly.
06
ETC
14. Laserströmbrytare
-
Axelns spärrknapp (Fig. D2)
Uppackning
1
Parallellanhåll
1
TCT-sågblad Ø 185 mm
1
Sexkantsnyckel
1 Uppsats
kolborstar
1
Bruksanvisning
1
Säkerhetsanvisningar
Kontrollera om maskinen, lösa delar eller tillbehör uppvisar transportkador.
2. SÄKERHETSFÖRESKRIFTER
I denna bruksanvisning används följande symboler:
Fara för kroppsskada eller materiell skada.
Anger elektrisk spänning.
CE-försäkran om överensstämmelse med tillämpliga europeiska
säkerhetsdirektiv.
Klass II utrustning – dubbelt isolerad – kontakten behöver inte jordas.
Läs bruksanvisningen.
Håll andra personer på avstånd.
Ta omedelbart ut stickkontakten ur eluttaget om sladden har skadats samt när
maskinen underhålls.
Bär skyddsglasögon och hörselskydd
Skadade och/eller kasserade elektriska och elektroniska apparater ska lämnas in
enligt gällande miljöregler.
S
FI
DK
N
EE
LV
LT
GB
S
FI
DK
N
EE
LV
LT
GB