Etatron eSelect M 1 CI, Operatinginstructions And Maintenance

Page: 17 / 30

ENGLISH 17
BASIC PROGRAMMING MENU
These are all the steps included in the MENU SELECTION menu configuration with BASIC programming:
◄ ► ◄ ►
*Selecting the C h l o r i n e S c a l e ,
S S E T P O I N T 1 and C C A L I B R A T I O N
will be followed by values in the selected Cl ppm
range
◄ ► ◄ ► ◄ ►
Press O O K / M E N U U to confirm the selection and to go on to the next sub-menu.
Press E S C to go back to the M E A S U R E M E N T D I S P L A Y A
SETPOINT 1 AND SETPOINT2 CL CHLORINE > BASIC MENU
SETPOINT1 CL SETPOINT2 CL
The chlorine instrument eSelect M CL is preset by default for a 0 to 2 ppm
range. By selecting the required chlorine range, the values and displays
change accordingly.
The setpoints will activate the output relays for the metering pumps or other
devices.
The display shows the values according to the selected Chlorine Scale.
Direct mode: the output is active
when the measured value is lower
than the one selected in the setpoint,
the metering pump injects Chlorine.
Setpoint 2 is set for operations in
Reverse mode: the output is active
also the measured value is higher
than the one selected in the
setpoint, the metering pump injects
a Chlorine reducing agent.
The unit has an ON-OFF mode which switches on or off (if the reverse mode
is ON) The output relays of Constant / ON-OFF metering pumps or other
ON-OFF equipment.
BY SELECTING
“
ON-
OFF”
THE NEXT STEP IS

“MIN ALARM”
(ONLY in SET POINT1)
Menu Selection
Setp oint 1*
Menu Selection
Setp oint 2*
Menu Selection
Calibr ati on*
Menu Selection
Start/S top times
Menu Selection
Settings
Menu Selection
Setpoint 1
Menu Selection
Setpoint 2
MENU SETPOINT 1 -2
Setpoint Value
0.000 Cl ppm

MENU BASE

MENU SETPOINT 1 -2
Setpoint Value
0.00 Cl ppm

MENU BASE

MENU SETPOINT 1 -2
Setpoint Value
0.00 Cl ppm
* (Tot )

MENU BASE

MENU SETPOINT 1 -2
Setpoint Value
0.00 Cl p p m

MENU BASE

MENU SETPOINT 1
Metering
Direc t

MENU BASE

MENU SETPOINT 2
Metering
Revers e

MENU BASE

MENU SETPOINT 1
Metering
Revers e

MENU BASE

MENU SETPOINT 2
Metering
Direc t

MENU BASE

MENU SETPOINT 1
Mode
ON/OF F

MENU BASE

MENU SETPOINT 2
Mode
ON/OF F

MENU BASE
