XETK-S4.2 - User’s Guide
33
ETAS
Technical Data
The configuration instructions for the XETK-S4.2 under INCA and HSP are con-
tained in the relevant software documentation.
7.2
Microcontroller Memory and XETK-S4.2 Microcontroller Support
7.2.1
Data Emulation Memory and Microcontroller Support
The XETK-S4.2 uses a portion of or up to the entire size of the ED RAM, to emu-
late data in internal flash. The following table lists the supported microcontrol-
lers, the size of the ED RAM, and states if the ED RAM is capable of being
powered using a standby supply.
7.2.2
Measurement Data Memory
7.3
Configuration
Microcontroller Max. ED RAM
Standby powered
TC1728ED
384 kByte
Yes
TC1782ED
512 kByte
Yes
TC1793ED
768 kByte
Yes
TC1797ED
512 kByte
Yes
TC1798ED
768 kByte
Yes
TC1798
n.a.
n.a.
Item
Characteristics
Location
Typically located within the emulation
memory when using DISTAB13 hooks.
Measurement data memory can be
located in internal RAM if EMEM is
needed for calibration.
Item
Characteristics
Configuration
Project-specific configuration for
- different microcontrollers or
- memory configurations
stored in EEPROM
Update
Logic devices updated using HSP soft-
ware
