F-00K-104-952
UNIVERSAL COIL-ON-PLUG IGNITION
FLEX PROBE KIT
OPERATING INSTRUCTIONS
The Universal COP Ignition Flex Probe Kit (part number F-00K-104-944) contains a probe which is
designed to be used with most domestic and import coil-on-plug (COP) vehicle ignition systems with
accessible coils. The probe provides easy access for secondary ignition pattern comparisons on coil-on-plug
ignition systems using the MTS 5200 Engine Analyzer.
The kit consists of the following components:
VEHICLE COVERAGE AND ACCURACY
• The flex probe included in this kit provides universal access to most coil-on-plug ignition systems with
accessible coils, even when other ignition leads do not. Although most coil-on-plug systems are
supported by this probe, some ignition systems do not emit a strong enough signal to obtain an adequate
reading for comparison and diagnostics using this probe.
• The Universal Coil-On-Plug Ignition Flex Probe serves as a quick analysis tool for use in the analyzer’s
Secondary Quick Check mode. Ignition voltage measurements made using this probe are primarily used
ORDERING
PART
NUMBER
PART
NUMBER
LABEL ON
PROBE
DESCRIPTION
USE
F-00K-104-945
1 687 224 993
Probe: Universal COP Ignition
Flex
Used on coil-on-plug systems
with accessible coils
SEC IGN
Universal COP
Ignition Flex Probe
(P/N 1 687 224 993)
FIGURE 1. Universal COP Ignition Flex Probe
