ETAS
Introduction
ETAI12 User Guide
10
3
Introduction
Adapts ECU with a 10 pin SAMTEC connector to an XETK-S21.0. Supported is
JTAG Interface. To increase the signal-noise ratio there is an buffer in the /TRST
line supplied by the VDD(Sense) Voltage. The adapter is suitable for 3,3V and 5V
JTAG Signals. For 5V the ETAI12 Adapter is required
3.1
View
Figure 2: View
NOTE
Minimum bending radius for the flex foil is 3mm.
i
