ETAS ES584.1, User Manual, Page: 23 / 56

ES584.1 – User’s Guide 23
ETAS Commissioning
4 Commissioning
This chapter contains information about the following topics:
• "ES584.1 USB Driver" on page 23
• "Preparing to Install" on page 23
• "Installing the USB Driver" on page 24
• "Verifying the Installation of the USB Driver" on page 27
• "Establishing the USB Connection" on page 28
• "Updating the USB Driver" on page 28
• "Uninstalling the USB Driver" on page 29
• "J2534 Driver" on page 30
• "Establishing the USB Connection" on page 28
4.1 ES584.1 USB Driver
A specific USB driver must be installed on the PC for operating the ES584.1
module.
The ES584.1 can be installed on plug & play-compatible operating systems (Win-
dows 7, Windows 8 and Windows 10). Following installation of the driver, you
can use/remove the ES584.1 module at any time.
4.2 Preparing to Install
4.2.1 Checking the System Requirements
Check whether your PC fulfills the system requirements (see chapter 6.7
on page 37). The installation of the USB driver on the PC requires administrator
rights. If necessary, contact your system administrator.
4.2.2 CD-ROM
The supplied DVD includes:
• USB driver for the ES584.1 with installation wizard
• Hardware Service Pack (HSP) for updating the firmware
• OSS attributions
• BUSMASTER open source software
• Documentation: ES584.1 user manual (this document)
The application for installing the USB driver is located on the DVD as an
auto-
start.exe
executable file.
Alternatively, you can install the driver using the ETAS service software "Hard-
ware Service Pack" (HSP).
Note