ETAS ES5371.1, User Manual

Page: 11 / 34

ES5371.1 Carrier Board for ES443x Load Boards - User’s Guide 11
ETAS Introduction
risks into account as well as taking into consideration the relevant documenta-
tion at all times. If the product is not used correctly, the protection of the product
may be impaired.
1.3 Identifications on the Product
The following symbols are used for identifying the product:
Observe the information in chapter "Technical Data" on page 27.
1.4 CE Marking
ETAS confirms that the product meets the product-specific applicable European
Directives with the CE marking affixed to the product or its packaging. The CE
Declaration of Conformity for the product is available upon request.
1.5 RoHS Conformity
1.5.1 European Union
The EU Directive 2002/95/EU limits the use of certain dangerous materials for
electrical and electronic devices (RoHS conformity).
ETAS confirms that the product corresponds to this directive which is applicable
in the European Union.
1.5.2 China
ETAS confirms that the product meets the product-specific applicable guidelines
of the China RoHS (Management Methods for Controlling Pollution Caused by
Electronic Information Products Regulation) applicable in China with the China
RoHS marking affixed to the product or its packaging.
The concluding chapter "ETAS Contacts" gives you information about the inter-
national ETAS sales and service branch offices.
Symbol Description
Before using the product, carefully read the user’s guide!
Identification for CE (see "CE Marking" on page 11)
Identification for China RoHS (see "RoHS Conformity"
on page 11)
Identification for WEEE directive
(see "Taking the Product Back and Recycling" on page 12)