ETAS ES5350.1, User Manual

Page: 35 / 40

ES5350.1 - User’s Guide 35
ETAS Technical Data and Standards
Physical Dimensions
5.2 Norms and Standards met
The ES5350.1 plug-in card meets the following norms and standards:
The module is only intended for use in industrial settings in accordance with
EN 61326-1. Avoid potential radio interference when using the module outside
of the industrial settings with additional shielding measures!
Height 4 U
Width 5 HP
Weight 0,5 kg
Standard Test
IEC 61326-1 Electrical equipment for measurement, control and laboratory
use – EMC requirements (industrial setting)
IEC 61010-1 Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 1: General requirements
WARNING!
This is class A equipment. This equipment can cause radio interfer-
ence in residential areas. In this case, the operator may be required to
institute reasonable measures.
Note
The signal lines may not exceed a maximum length of 3 m!