ETAS ES5340.2, User Manual

Page: 18 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 18
Introduction ETAS
1.5 Identifications on the Product
The following symbols are used for identifying the product:
Observe the information in the chapter "Technical Data and Standards"
on page 111.
1.5.1 CE Marking
ETAS confirms that the product meets the product-specific applicable European
Directives with the CE marking affixed to the product or its packaging. The CE
Declaration of Conformity for the product is available upon request.
1.5.2 KC Mark
With the KC mark attached to the product and its packaging, ETAS confirms that
the product has been registered in accordance with the product-specific KCC
guidelines of the Republic of Korea.
1.5.3 RoHS Conformity
European Union
The EU Directive RoHS 2011/65/EU limits the use of certain dangerous materials
for electrical and electronic devices (RoHS conformity).
ETAS confirms that the product corresponds to this directive which is applicable
in the European Union.
China
ETAS confirms that the product meets the product-specific applicable guidelines
of the China RoHS (Management Methods for Controlling Pollution Caused by
Electronic Information Products Regulation) applicable in China with the China
RoHS marking affixed to the product or its packaging.
Symbol Description
The User's Guide must be read prior to the startup of the
product
Identification for CE conformity (see "CE Marking"
on page 18)
Identification for China RoHS (see "RoHS Conformity"
on page 18)
Identification for WEEE directive
(see "Taking the Product Back and Recycling" on page 19)