ETAS ES5340.2, User Manual

Page: 103 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 103
ETAS Order Information and Scope of Delivery
7 Order Information and Scope of Delivery
This chapter includes the general order information of the ES5340.2 Electric
Drive Simulation Board and for optional accessories.
It also describes the procedure of ordering the FPGA model for subsequent
installation.
7.1 General Order Information
7.2 Separate Order of an FPGA Model
FPGA-based models are available for the ES5340.2 Electric Drive Simulation
Board (Master). If you have not purchased them along with the hardware, when
purchasing a model subsequently, you are required to have ETAS upgrade the
ES5340.2.
After we receive the quotation and your order, you have to send the correspond-
ing ES5340.2 to ETAS along with a repair order.
Order Name Short Name Order Number
Electric Drive Master Board (Multi I/O) ES5340.2-M F-00K-107-937
Optional Accessories:
Electric Drive Slave Board (Multi I/O) ES5340.1-S F-00K-107-054
FPGA Inverter/PMSM Model for ES5340 LCM_PMSM5340 F-00K-107-259
FPGA Inverter/IM Model for ES5340 LCM_IM5340_U1 F-00K-108-251
Calibration Service for ES5340 Master K_ES5340-M F-00K-107-056
Calibration Service for ES5340 Slave K_ES5340-S F-00K-107-057
Scope of Delivery ES5340.2-M Number of Pieces
ES5340.2-M Electric_Drive_Master_Board (Multi I/O) 1
Terminating connector 1
Ribbon cable short for installation in neighboring RTPC slots 1
Ribbon cable long for installation in the ES5370.1 1
Scope of Delivery ES5340.1-S Number of Pieces
ES5340.1-S Electric_Drive_Slave_Board (Multi I/O) 1
Terminating connector 1
Ribbon cable short for installation in neighboring RTPC slots 1
Ribbon cable long for installation in the ES5370.1 1
Gigabit Link
(available in three lengths, depending on the distance
between the slots that are fitted with ES5340.2-M and
ES5340.1-S in the RTPC) 1