ES5321.1 PWM I/O Board (48/32-CH) - User’s Guide
25
ETAS
In- and Output-Signals
3
In- and Output-Signals
This chapter features an overview of the supported measuring methods for the
PWM input signals and of the output modes for the output signals.
• "Supported Measuring Methods for Input Channels" on page 25
• "Output Modes for the Output Signals" on page 28
• "Multi-Pulse Signals" on page 28
3.1
Supported Measuring Methods for Input Channels
The following measuring methods exist for the 48 measuring inputs:
• Measuring signals with frequencies up to 100 kHz
• Pulse-width measurement (High Time [μs], Low Time [μs])
• Additive pulse-width measurement (Additive High Time [μs], Additive Low
Time [μs])
• Frequency measurement
• Duty cycle measurement (Duty Cycle L/(L+H), Duty Cycle H/(L+H))
• Level measurement (Active High, Active Low)
• Measurement of SENT signals on up to 4 channels
Summary of Contents for ES5321.1
Page 1: ...ES5321 1 PWM I O Board 48 32 CH User s Guide...
Page 18: ...ES5321 1 PWM I O Board 48 32 CH User s Guide 18 Introduction ETAS...
Page 34: ...ES5321 1 PWM I O Board 48 32 CH User s Guide 34 Connections and Connectors ETAS...
Page 40: ...ES5321 1 PWM I O Board 48 32 CH User s Guide 40 ETAS Contact Addresses ETAS...