ETAS ES4602, User Manual

Page: 17 / 38

Technical Description 17
For the ES4602 Breakout Panel, the +U
bat
and –U
bat
signals on the CON-L(2)
side are routed to three (+U
bat
) or six (–U
bat
) lab jacks (see Figure "Signal Chan-
nel Routing on the ES4602 Breakout Panel" on page 16 "Channel #339" and
"Channel #340"). After the jumper, the signals are then split into three (+U
bat
)
or six
(-U
bat
) individual signals (see Figure "Signal Channel Routing on the ES4602
Breakout Panel" on page 16 and Figure "Distribution of the Battery Nodes to
the Plug-In Bridges" on page 17). This meets the requirement for supply volt-
ages that can be split into individual voltages. The indi/–U
bat
signals are
protected towards the control unit side by means of a miniature car fuse (15 A)
(see also Table "Current-Carrying Capacity of the Backplane" on page 19).
Fig. 3-9 Distribution of the Battery Nodes to the Plug-In Bridges
CON-S
CON-L
34
0/1 34
0/2
34
0/3 34
0/4 34
0/5
34
0/6
33
9/1
33
9/2
33
9/3