ETAS ES4455.1, User Manual

Page: 7 / 28

Introduction 7
The following figure shows the front panel of the ES4455.1 Load Board.
Fig. 1-2 Front Panel of the ES4455.1 Load Board
The elements of the front panel are:
• The „Load n “ LEDs indicating load current
• The LEDs which light up when the currents exceed a threshold set in
the (LABCAR-RTC) software
• The potentiometers for setting the lower and upper thresholds for
digitizing the output signal
• The “Threshold Calibration” connector at which the thresholds set
using the potentiometers are output
ETAS
ES4455.1
Load0
Load1
Load2
Load3
Threshold high Load 0
Threshold low Load 0
Threshold high Load 1
Threshold low Load 1
Threshold high Load 2
Threshold low Load 2
Threshold high Load 3
Threshold low Load 3
Threshold
calibration
connection
!