ETAS
Technical Data
ES413.1 - User’s Guide
62
The manufacturers of network adapter have different names for this function.
Example:
• “Link down Power saving”
• "Allow the computer to turn off this device to save power".
7.7.2
Software
To configure the ES413.1 and for control and data acquisition, you need soft
-
ware in the following versions:
• INCA V6.2.1 and higher with INCA-ES4xx Add-On V1.1.12 and higher
or
• ES4xx Daisy Chain Configuration Tool V1.1.12 and higher (stand-alone
operation)
or
• ASCET RP V6.1.0 and higher
or
• INTECRIO V3.2.0 and higher.
7.8
Electrical Data
This chapter contains information on the following topics:
• “Host Interface” on page 63
• “Power Supply” on page 63
• “Sensor Power Supply” on page 64
• “Sensor Inputs” on page 64
• “Signal Processing” on page 66
TIP
Operating the ES413.1 with older versions of software is not possible.
TIP
ETAS guarantees measurement accuracy of the ES413.1 for one year. Please
use our calibration service (see section 4.9 on page 33)!
TIP
Unless otherwise specified, all data applies at 25 °C.