ETAS
Technical Data
ES413.1 - User’s Guide
63
7.8.1
Host Interface
7.8.2
Power Supply
1)
: The module may be used only with central load dump protection.
Connection
100Base-T Ethernet; 100 Mbit/s,
Full Duplex
PC Card 32-bit
Protocol
XCP on UDP/IP
IP address
Dynamic via INCA or via
ES4xx Configuration Tool from
ES4xx_DRV_SW (stand-alone opera
-
tion)
TIP
To ensure successful initialization of the network card of your PC, refer to
chapter 7.7.1 on page 61.
Operating voltage
Temperature range -40 °C to +85 °C:
5 V to 50 V DC
Temperature range -40 °C to +120 °C:
6 V to 50 V DC
Power consumption (operation, sen
-
sors not connected)
Typ. 2 W at 12 V DC
Power consumption (operation; all
channels loaded with 30 mA)
Max. 4.6 W at 12 V DC
Power consumption (standby, sen
-
sors not connected, room tempera
-
ture)
Typ. 25 mW at 12 V DC
Polarity inversion protection, load
dump protection
1)
With CBEP410, CBEP4105, CBEP415,
CBEP4155, CBEP420, CBEP4205,
CBEP425, CBEP4255, CBEP430,
CBEP4305 cable